From ba7906ad9f664993a00a2f39d4699c9b1b03fd6c Mon Sep 17 00:00:00 2001
From: admar <admar@luon.net>
Date: Tue, 24 May 2022 22:24:39 +0200
Subject: [PATCH] Set static temperature offset for BME680 + select correct
 configuration

---
 Claire.ino | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/Claire.ino b/Claire.ino
index 7f3b673..6ab3adb 100644
--- a/Claire.ino
+++ b/Claire.ino
@@ -40,6 +40,10 @@ static int CONNECT_SW_PIN = 0;
 Adafruit_NeoPixel leds_rgb_proto_paper(NUM_LEDS_PROTO_PAPER, DATA_PIN_PROTO_PAPER, NEO_GRB + NEO_KHZ800);
 Adafruit_NeoPixel leds_rgbw_proto_v1(NUM_LEDS_PROTO_V1, DATA_PIN_PROTO_V1, NEO_RGBW + NEO_KHZ800);
 
+const uint8_t bsec_config_iaq[] = {
+  #include "config/generic_33v_3s_4d/bsec_iaq.txt"
+};
+
 static int ledMapPrecipitation[12] = {0};
 static int ledMapPAQI[12] = {0};
 static int ledMapUVI = 0;
@@ -312,7 +316,7 @@ void readSensors(void) {
 
   unsigned long time_trigger = millis();
   if (iaqSensor.run()) { // If new data is available
-    output = String(time_trigger);
+    output = "Time: " + String(time_trigger);
     output += " ms, Traw: " + String(iaqSensor.rawTemperature);
     output += " *C , P: " + String(iaqSensor.pressure);
     output += " hPa, RHraw: " + String(iaqSensor.rawHumidity);
@@ -320,8 +324,8 @@ void readSensors(void) {
     output += " Ohm, IAQ: " + String(iaqSensor.iaq);
     output += ", accuracy: " + String(iaqSensor.iaqAccuracy);
     output += ", Tcorr: " + String(iaqSensor.temperature);
-    output += " *C, RHcorr" + String(iaqSensor.humidity);
-    output += " %, IAQ static" + String(iaqSensor.staticIaq);
+    output += " *C, RHcorr: " + String(iaqSensor.humidity);
+    output += " %, IAQstatic: " + String(iaqSensor.staticIaq);
     output += ", eCO2: " + String(iaqSensor.co2Equivalent);
     output += " ppm, eVOC: " + String(iaqSensor.breathVocEquivalent);
     output += " ppm";
@@ -370,6 +374,10 @@ void setup() {
     leds_rgb_proto_paper.begin(); // INITIALIZE NeoPixel strip object
   } else {
     Serial.println(F("BME680 found; assuming hw variant \"proto v1\""));
+
+    iaqSensor.setConfig(bsec_config_iaq);
+    iaqSensor.setTemperatureOffset(13.5f);
+    checkIaqSensorStatus();
     
     hw_variant = HW_PROTO_V1;
     setup_pins_proto_v1();
@@ -631,7 +639,7 @@ static int colormap(float x) {
 float colormapIaqi(void)
 {
     float x = 0.0f;
-    float iaqi = iaqSensor.iaq;
+    float iaqi = iaqSensor.staticIaq;
 
     if (iaqi <= 50.0f) {
       x = 1.0f; // Excellent