paul
/
stm32f4disc-demo
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
This is just some STM32F4DISCOVERY demo application written in Rust.
49 Commits 1 Branch 0 Tags 79 KiB
Rust 88.7%
Linker Script 6.8%
GDB 4.5%
Go to file
Paul van Tilburg ebeb18e8d8
Enable running unit tests in GitLab CI 
Do this for the library/local crate only.  Not the main binary nor
the examples can be tested for the x86_64-unknown-linux-gnu target.
 		2019-04-11 20:10:49 +02:00
.cargo Remove unused example stuff from the Cargo config 2019-04-02 16:09:35 +02:00
examples Do not use panic_semihosting during tests 2019-04-06 13:01:20 +02:00
src Move the led_ring module to a local crate 2019-04-11 20:09:43 +02:00
.gitignore Initial import into Git 2019-03-05 15:04:26 +01:00
.gitlab-ci.yml Enable running unit tests in GitLab CI 2019-04-11 20:10:49 +02:00
Cargo.toml Move the led_ring module to a local crate 2019-04-11 20:09:43 +02:00
LICENSE.md Add license and readme files 2019-03-19 08:52:48 +01:00
README.md Improve the README 2019-04-02 15:47:57 +02:00
memory.x Initial import into Git 2019-03-05 15:04:26 +01:00
openocd.cfg Initial import into Git 2019-03-05 15:04:26 +01:00
openocd.gdb Initial import into Git 2019-03-05 15:04:26 +01:00

README.md

stm32f4disc-demo

This is just some STM32F4DISCOVERY demo application using Rust. It a serial command-interface for controlling (via GPIO) what the LED ring does: cycle clock-wise, counter clock-wise, or follow the accelerometer. The accelerometer is accessed via SPI.

Serial interface

The serial interface is configured on USART 2 and can be accessed using, for example, an USB-to-serial cable connected to a ground pin, and RX to PA2 and TX to PA3.

The interface will output the following lines:

  • init after initialization has finished
  • button when the user button has been pressed
  • level when the board is being held in a perfect level position (when in acceleration mode)

The following lines can be given as commands:

  • on to turn all the leds on (and disable accelerometer/cycle mode)
  • off to turn all the leds off (and disable accelerometer/cycle mode)
  • accel to switch to accelerometer mode
  • cycle to switch to cycle mode
  • stop to freeze the LEDs in the current position

License

0-clause BSD license.