Set static temperature offset for BME680 + select correct configuration
This commit is contained in:
parent
25dd53116c
commit
ba7906ad9f
16
Claire.ino
16
Claire.ino
|
@ -40,6 +40,10 @@ static int CONNECT_SW_PIN = 0;
|
||||||
Adafruit_NeoPixel leds_rgb_proto_paper(NUM_LEDS_PROTO_PAPER, DATA_PIN_PROTO_PAPER, NEO_GRB + NEO_KHZ800);
|
Adafruit_NeoPixel leds_rgb_proto_paper(NUM_LEDS_PROTO_PAPER, DATA_PIN_PROTO_PAPER, NEO_GRB + NEO_KHZ800);
|
||||||
Adafruit_NeoPixel leds_rgbw_proto_v1(NUM_LEDS_PROTO_V1, DATA_PIN_PROTO_V1, NEO_RGBW + NEO_KHZ800);
|
Adafruit_NeoPixel leds_rgbw_proto_v1(NUM_LEDS_PROTO_V1, DATA_PIN_PROTO_V1, NEO_RGBW + NEO_KHZ800);
|
||||||
|
|
||||||
|
const uint8_t bsec_config_iaq[] = {
|
||||||
|
#include "config/generic_33v_3s_4d/bsec_iaq.txt"
|
||||||
|
};
|
||||||
|
|
||||||
static int ledMapPrecipitation[12] = {0};
|
static int ledMapPrecipitation[12] = {0};
|
||||||
static int ledMapPAQI[12] = {0};
|
static int ledMapPAQI[12] = {0};
|
||||||
static int ledMapUVI = 0;
|
static int ledMapUVI = 0;
|
||||||
|
@ -312,7 +316,7 @@ void readSensors(void) {
|
||||||
|
|
||||||
unsigned long time_trigger = millis();
|
unsigned long time_trigger = millis();
|
||||||
if (iaqSensor.run()) { // If new data is available
|
if (iaqSensor.run()) { // If new data is available
|
||||||
output = String(time_trigger);
|
output = "Time: " + String(time_trigger);
|
||||||
output += " ms, Traw: " + String(iaqSensor.rawTemperature);
|
output += " ms, Traw: " + String(iaqSensor.rawTemperature);
|
||||||
output += " *C , P: " + String(iaqSensor.pressure);
|
output += " *C , P: " + String(iaqSensor.pressure);
|
||||||
output += " hPa, RHraw: " + String(iaqSensor.rawHumidity);
|
output += " hPa, RHraw: " + String(iaqSensor.rawHumidity);
|
||||||
|
@ -320,8 +324,8 @@ void readSensors(void) {
|
||||||
output += " Ohm, IAQ: " + String(iaqSensor.iaq);
|
output += " Ohm, IAQ: " + String(iaqSensor.iaq);
|
||||||
output += ", accuracy: " + String(iaqSensor.iaqAccuracy);
|
output += ", accuracy: " + String(iaqSensor.iaqAccuracy);
|
||||||
output += ", Tcorr: " + String(iaqSensor.temperature);
|
output += ", Tcorr: " + String(iaqSensor.temperature);
|
||||||
output += " *C, RHcorr" + String(iaqSensor.humidity);
|
output += " *C, RHcorr: " + String(iaqSensor.humidity);
|
||||||
output += " %, IAQ static" + String(iaqSensor.staticIaq);
|
output += " %, IAQstatic: " + String(iaqSensor.staticIaq);
|
||||||
output += ", eCO2: " + String(iaqSensor.co2Equivalent);
|
output += ", eCO2: " + String(iaqSensor.co2Equivalent);
|
||||||
output += " ppm, eVOC: " + String(iaqSensor.breathVocEquivalent);
|
output += " ppm, eVOC: " + String(iaqSensor.breathVocEquivalent);
|
||||||
output += " ppm";
|
output += " ppm";
|
||||||
|
@ -370,6 +374,10 @@ void setup() {
|
||||||
leds_rgb_proto_paper.begin(); // INITIALIZE NeoPixel strip object
|
leds_rgb_proto_paper.begin(); // INITIALIZE NeoPixel strip object
|
||||||
} else {
|
} else {
|
||||||
Serial.println(F("BME680 found; assuming hw variant \"proto v1\""));
|
Serial.println(F("BME680 found; assuming hw variant \"proto v1\""));
|
||||||
|
|
||||||
|
iaqSensor.setConfig(bsec_config_iaq);
|
||||||
|
iaqSensor.setTemperatureOffset(13.5f);
|
||||||
|
checkIaqSensorStatus();
|
||||||
|
|
||||||
hw_variant = HW_PROTO_V1;
|
hw_variant = HW_PROTO_V1;
|
||||||
setup_pins_proto_v1();
|
setup_pins_proto_v1();
|
||||||
|
@ -631,7 +639,7 @@ static int colormap(float x) {
|
||||||
float colormapIaqi(void)
|
float colormapIaqi(void)
|
||||||
{
|
{
|
||||||
float x = 0.0f;
|
float x = 0.0f;
|
||||||
float iaqi = iaqSensor.iaq;
|
float iaqi = iaqSensor.staticIaq;
|
||||||
|
|
||||||
if (iaqi <= 50.0f) {
|
if (iaqi <= 50.0f) {
|
||||||
x = 1.0f; // Excellent
|
x = 1.0f; // Excellent
|
||||||
|
|
Loading…
Reference in New Issue